Home | Products | Band Saw Blades for metal cutting


Bi- Metal Band Saw Blades - M42 - 420 MASSIVE Expert

Bi- Metal Band Saw Blades M42 - 420 MASSIVE Expert :

Usage:
  • common steel qualities up to 1400 N/mm2 tensile strength
  • non ferrous metals
  • cross sections up to approx. 100 mm (4")
  • contour cutting operations
Characteristic:
  • tooth tips made of HSS M42 / material no. 1.3247
  • standard teeth with 0 resp. slightly positive rake angle combined with a standard-raker or wavy set is distinguished to cut short chipping materials and light wall thickness
  • for smooth and burr-free cuts

DimensionsTeeth per inch
mminch468101418
6 x 0,901/4 x 0,035   NN 
10 x 0,903/8 x 0,035  NNN 
13 x 0,651/2 x 0,025   NNN
13 x 0,901/4 x 0,035 N NN 
20 x 0,903/4 x 0,035NNNNN 
27 x 0,9011/16 x 0,035NNNNN 
34 x 1,1013/8 x 0,042NN    
41 x 1,3013/8 x 0,050NN    
Legend: N - standard



Bi- Metal Band Saw Blades - M42 430 Expert

Bi- Metal Band Saw Blades M42 430 Expert :

Usage:
  • common steel qualities up to 1400 N/mm2 tensile strength
  • profiles of non- ferrous metals
  • single and bundle cuts
  • tubes and structurals with light or medium walls
  • sheet metal on vertical band saw machines
Characteristic:
  • tooth tops from material HSS M42, DIN 1.3247
  • variable tooth with 0 rake angle with a special group-set cuts even lightest sections with less vibrations
  • short chipping materials are cut without a problem
  • long life and low cost cutting

DimensionsTeeth per inch
mminch3/44/65/86/108/1210/14
6 x 0,901/4 x 0,035     V-O
10 x 0,903/8 x 0,035     V-O
13 x 0,651/2 x 0,025   V-OV-OV-O
13 x 0,901/4 x 0,035   V-OV-OV-O
20 x 0,903/4 x 0,035 V-OV-OV-OV-OV-O
27 x 0,9011/16 x 0,035V-OV-OV-OV-OV-OV-O
34 x 1,1013/8 x 0,042V-OV-OV-OV-OV-OV-O
41 x 1,3013/8 x 0,50V-OV-OV-OV-O  
54 x 1,3021/8 x 0,050V-OV-O    
54 x 1,6021/8 x 0,063V-OV-O    
Legend: V-O - variable teeth



Bi- Metal Band Saw Blades - M42 431 PROFILE Expert Plus

Bi- Metal Band Saw Blades M42 431 PROFILE Expert Plus :

Usage:
  • common steel qualities up to 1400 N/mm2
  • non- ferrous metals
  • single and bundle cuts
  • solid material of medium to large dimensions
  • heavy wall tubes
Characteristic:
  • tooth tops from material HSS M42, DIN 1.3247
  • variable teeth with a positive rake angle with a special group-set cut solid materials as well as heavy wall structurals and tubing at fast cutting rates, with a smooth surface

DimensionsTeeth per inch
mminch0,75/1,251/22/33/44/6
20 x 0,903/4 x 0,035    V-POS
27 x 0,9011/16 x 0,035  V-POSV-POSV-POS
34 x 1,1013/8 x 0,042  V-POSV-POSV-POS
41 x 1,3013/8 x 0,050 V-POSV-POSV-POSV-POS
54 x 1,3021/8 x 0,050 V-POSV-POSV-POSV-POS
54 x 1,6021/8 x 0,063 V-POSV-POSV-POSV-POS
67 x 1,6025/8 x 0,063V-POSV-POSV-POSV-POS 
80 x 1,6031/8 x 0,063V-POSV-POSV-POS  
Legend: V-POS - variable teeth with positive rake angle



Bi- Metal Band Saw Blades - M42 435 PROFILE Master

Bi- Metal Band Saw Blades M42 435 PROFILE Master :

Usage:
  • H-beams and similar shapes of medium and large dimensions
  • angles and similar shapes
Characteristic:
  • tooth tops from material HSS M42, DIN 1.3247
  • variable teeth with slightly positive rake angle and extra heavy group-set shows excellent performance on H-beams and similar shapes
  • avoids blade pinching in beams with inside tension, or in poorly supported profiles
  • for 90 and mitter cutting

DimensionsTeeth per inch
mminch2/33/44/6
27 x 0,9011/16 x 0,035 V-POS 
34 x 1,1013/8 x 0,042V-POSV-POSV-POS
41 x 1,3013/8 x 0,050V-POSV-POSV-POS
54 x 1,3021/8 x 0,050V-POSV-POS 
54 x 1,6021/8 x 0,063V-POSV-POSV-POS
67 x 1,6025/8 x 0,063V-POSV-POSV-POS
Legend: V-POS - variable teeth with positive rake angle



Bi- Metal Band Saw Blades - M51 531 EXPERT PLUS

Bi- Metal Band Saw Blades M51 531 EXPERT PLUS :

Usage:
  • steels up to 1700 N/mm2 tensile strength
  • authentic stainless steels
  • nickle-based alloys
  • Titanum and special bronzes
  • solid material of medium dimensions
  • heavy wall tubing
Characteristic:
  • tooth tops from material HSS M51, DIN 1.3207
  • positive variable tooth with special strong tooth forms
  • high heat and wear resistance of HSS M51 tooth tips increases band life on all hard and problematic steels

DimensionsTeeth per inch
mminch2/33/44/6
27 x 0,9011/16 x 0,035 V-POSV-POS
34 x 1,1013/8 x 0,042V-POSV-POSV-POS
41 x 1,3013/8 x 0,050V-POSV-POS 
54 x 1,6021/8 x 0,063V-POS  
Legend: V-POS - variable teeth with extremely positive rake angle


Bi- Metal Band Saw Blades

Band Saw Blades Made from bi-metal and also tool steel. The wide assortment is designated for the cutting of diverse materials, for a wide range of cross sections and for various mechanical properties of the material being split.